Alex,

I remember you mentioned that at one point SDK had an ability of exposing raw RGB Bayer data.
If this data is 10bits data, I think this would be of great value.
Also, I’m reading of possibility of larger exposure time: that in combination could be great!

I wouldn’t ask for Bayer if it is 8bit, as I don’t see any value as it is the same as RGB.
But if it is 10bits: that would be nice to expose.
Larger color depth is the future.

igor1960 - 22 January 2010 02:49 AM

Alex,

I remember you mentioned that at one point SDK had an ability of exposing raw RGB Bayer data.
If this data is 10bits data, I think this would be of great value.
Also, I’m reading of possibility of larger exposure time: that in combination could be great!

I wouldn’t ask for Bayer if it is 8bit, as I don’t see any value as it is the same as RGB.
But if it is 10bits: that would be nice to expose.
Larger color depth is the future.

I looked into it and the good news is that we can get 10bit raw data from the sensor. Also, lowering the frame rate is very doable. This is something we will add in future release of SDK.

AlexP